380V H80-355 IP55 High Efficiency Three Phase Asynchronous Motor

380V H80-355 IP55 High Efficiency Three Phase Asynchronous Motor

Product Description:
 
DC motor is a rotating motor that can transform DC electrical power into mechanical power (DC motor) or mechanical power into DC electrical power (DC generator). It is a motor that can transform DC and mechanical strength into one particular an additional. When it operates as a motor, it is a immediate current motor, which converts electrical vitality into mechanical strength when it operates as a generator, it is a immediate current generator, which converts mechanical strength into electrical strength.
 

Merchandise Name 380V H80-355 IP55 High Effectiveness A few Phase Asynchronous Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition framework The construction of DC motor should consist of two components: stator and rotor. The static part of DC motor is named stator. The main operate of stator is to produce magnetic area, which is composed of base, main magnetic pole, commutation pole, end cap, bearing and brush system. Operating part is called rotor, whose major purpose is to produce electromagnetic torque and inductive electromotive force. It is the hub of strength conversion of DC motor. So it is also typically called armature, which is made up of rotor, armature core, armature winding, commutator and supporter.
Product Z Variety
Seat variety Z315-Z1000
power sixty~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Defense stage IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Running speed  Constant Speed /Low Velocity /Modify Pace /Higher Speed Other 
Principal classification DC Motor is a device that converts mechanical vitality into DC energy. It is primarily used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy supply of alternator. Though in places in which DC energy is necessary, AC electricity rectifier is also employed to convert AC into DC electricity, but from some factors of performance, AC rectifier power source can not completely exchange DC generator.  
Software DC motors are extensively utilized in tape recorders, movie recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Maintenance approach Skilled motor routine maintenance centre motor maintenance method: cleansing stator and rotor – changing carbon brush or other areas – vacuum F force dipping paint – drying – Calibration balance.
one. Use setting need to be usually dry, motor surface need to be retained clean, air consumption ought to not be hindered by dust, fibers and other obstructions.
2. When the thermal security of the motor continues to run, it must be ascertained whether or not the fault will come from the motor or the overload or the location benefit of the protecting system is as well lower. After getting rid of the fault, it can be put into procedure.
three, guarantee that the motor is well lubricated in the course of operation. The standard motor runs for about 5000 several hours, that is to say, lubricating grease ought to be additional or changed. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic force need to change lubricating grease in time. When changing grease, the previous grease ought to be eliminated, and the oil groove of bearing and bearing protect should be washed with gasoline. Then ZL-three lithium grease need to be crammed with 1/two (two poles) and 2/three (4 poles, six poles and eight poles) of the cavity in between the inner and outer rings of the bearing.
4. When the daily life of the bearing is above, the vibration and sound of the motor will improve clearly. When the radial clearance of the bearing reaches the following worth, the bearing must be replaced.
five, when eliminating the motor, it is Alright to take away the rotor from the shaft extension or the non extension finish. If it is not necessary to unload the enthusiast, it is far more handy to consider out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from being ruined.
6. When replacing the windings, the sort, dimension, turns and gauges of the authentic windings must be recorded. When these information are lost, they should be attained from the company and the authentic developed windings should be modified at will, which frequently deteriorates one particular or a number of functionality of the motor or even tends to make it extremely hard to use them.

 

 

380V H80-355 IP55 High Efficiency Three Phase Asynchronous Motor

Tags:

Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts