AC DC Motor for Oil Field Pumping Unit

AC DC Motor for Oil Field Pumping Unit

Item Description:
DC motor is a rotating motor that can convert DC electrical power into mechanical strength (DC motor) or mechanical energy into DC electric vitality (DC generator). It is a motor that can convert DC and mechanical energy into one an additional. When it operates as a motor, it is a direct recent motor, which converts electrical energy into mechanical vitality when it runs as a generator, it is a immediate present generator, which converts mechanical power into electrical strength.

Solution Name AC Dc motor For oil field pumping unit
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The framework of DC motor ought to consist of two components: stator and rotor. The static element of DC motor is named stator. The primary perform of stator is to produce magnetic field, which is composed of base, primary magnetic pole, commutation pole, end cap, bearing and brush system. Working part is called rotor, whose principal function is to create electromagnetic torque and inductive electromotive power. It is the hub of energy conversion of DC motor. So it is also frequently named armature, which is made up of rotor, armature core, armature winding, commutator and fan.
Design ZSN,ZTP,Z4,Z2
Functioning pace  Constant Velocity /Minimal Pace /Alter Speed /Higher Speed Other 
Major classification DC Motor is a equipment that converts mechanical vitality into DC electricity. It is largely employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy offer of alternator. Though in spots where DC electrical power is necessary, AC power rectifier is also utilized to transform AC into DC electricity, but from some elements of functionality, AC rectifier electricity source can not fully exchange DC generator.  
Defense grade IP55
Thermal Course a hundred and fifty five (F)
Application DC motors are widely utilized in tape recorders, online video recorders, online video discs, electrical shavers, hair dryers, digital watches, toys and so on.
Servicing approach Professional motor servicing centre motor routine maintenance process: cleansing stator and rotor – replacing carbon brush or other elements – vacuum F force dipping paint – drying – Calibration balance.
one. Use surroundings must be usually dry, motor area must be kept clean, air ingestion should not be hindered by dust, fibers and other obstructions.
2. When the thermal security of the motor carries on to operate, it must be ascertained whether or not the fault arrives from the motor or the overload or the location worth of the protecting system is also minimal. After removing the fault, it can be place into operation.
three, make sure that the motor is effectively lubricated during operation. The standard motor operates for about 5000 several hours, that is to say, lubricating grease ought to be added or changed. When bearing overheating or lubricating deterioration is identified in procedure, the hydraulic strain need to alter lubricating grease in time. When replacing grease, the aged grease should be eliminated, and the oil groove of bearing and bearing include need to be washed with gasoline. Then ZL-3 lithium grease must be crammed with one/two (two poles) and 2/3 (4 poles, 6 poles and 8 poles) of the cavity amongst the interior and outer rings of the bearing.
four. When the life of the bearing is in excess of, the vibration and sound of the motor will enhance clearly. When the radial clearance of the bearing reaches the adhering to value, the bearing ought to be replaced.
five, when getting rid of the motor, it is Alright to remove the rotor from the shaft extension or the non extension end. If it is not essential to unload the enthusiast, it is much more handy to take out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from being broken.
6. When changing the windings, the sort, dimension, turns and gauges of the first windings should be recorded. When these knowledge are lost, they need to be received from the company and the original created windings need to be altered at will, which frequently deteriorates a single or a number of efficiency of the motor or even can make it extremely hard to use them.



AC DC Motor for Oil Field Pumping Unit


Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts