China S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox supplier

Solution Description

S series correct-angle helical-worm reduction gearbox was created right after RV worm microreducer, which have a comprehensive norm, wide velocity for selection, and a variety of mounting positions.
Goods Description
S sequence is 1 type of Helical worm gearbox, designed as Modularization and high-stainless cast iron case. It is combination of helical gear and worm equipment, which with larger effectiveness and strength than straightforward aluminum alloy worm gearbox. Thanks to their outstanding effectiveness, these drives can be employed in every single industrial sector and customized to personal torque and velocity needs. The gear ratios afforded by the helical-worm equipment stage and the lower noise stages during operation make these gearmotors perfect lower-cost solutions for basic apps.
Ideal for the equipment and gear of adhering to industry:
• Conveyor & Material handling
• Mining & Quarry
• Crusher & Cement
• Automated production line & Mixer
• Transport & Packaging
• Food device & Beverage
• Development & Metallic processing
• Plastic & Chemical market

Housing substance Substantial-energy forged iron  HT250
Equipment substance 20CrMnTi
Input Electricity .twelve-90KW
Output Torque 3.5-4000N.m
Output Velocity 5-371 RPM
Equipment Accuracy seven to 6 stage
Equipment Area hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Sound(Max) sixty-70dB
Tem.rise(Max) 40°C
Tem.increase(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency One phase 98%, Double-phase:ninety six%, A few-phase:ninety four%
Mounting Placement Foot / Flange Mounting
Motor IP55,F Course

    

Input electrical power ranking and permissible torque
Dimension 37 forty seven 57 sixty seven seventy seven 87 ninety seven
Structure S           SA             SF             SAF             SAT              SAZ
Rated Energy .twelve-1.5 .12-1.5 .eighteen-3 .25-5.5 .55-7.5 .seventy five-fifteen one.5-22
Ratio six.8-157.43 7.28-201 7.28-201 7.sixty five-217.41 eight.06-256.47 seven.88-288 eight.26-286.four
Torque(N.m) ninety one hundred seventy three hundred 520 1270 2280 4000

 

Equipment Device Bodyweight
Gear Unit Type S37 S47 S57 S67 S77 S87 S97
Excess weight
 
seven ten 14 26 fifty 100 170
The bodyweight are indicate values, only for reference

 
Organization Profile
HangZhou GEARWELL has been in energy transmission merchandise for 15 several years. Our company is an industry transmission remedies manufacuturer and provider service provider.
The principal items are worm reducers, helical worm reducers, helical bevel equipment reducers, ninety diploma gearbox, spiral bevel reducers, screw jack, standard industrial gearbox and so forth.
Our pace reducer and industrial gearbox are widely employed in distinct factories, this sort of as chemical compounds, energy, substance managing, environmental, extraction, pulp and paper, metal and steel, food and beverage, and construction industries.
We have powerful technical capability, producing in accordance to the ISO9002 good quality control program guidelines.
Our industrial Equipment, Gearbox, gearmotor and motor are sold to more than thirty countries. Large top quality, good price tag, in time reaction and sincere support are our benefit and promises. We purpose at creating pleased cooperation with our customers, bring them trustworthy and relaxed service.

Software
FAQ 
1. How to pick a gearbox which satisfies our prerequisite?
You can refer to our catalogue to decide on the gearbox or we can support to choose when you offer
the complex information of required output torque, output speed and motor parameter and so on.
two. What details shall we give ahead of placing a obtain get?
a) Type of the gearbox, ratio, enter and output sort, enter flange, mounting placement, and motor informationetc.
b) Housing coloration.
c) Buy quantity.
d) Other specific needs.

3. What industries are your gearboxes becoming employed?
Our gearboxes are widely employed in the regions of textile, meals processing, beverage, chemical sector,
escalator,computerized storage gear, metallurgy, tabacco, environmental safety, logistics and and so on.

US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Marine, Toy, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: as Request
Step: Three-Step

###

Customization:

###

Housing material High-strength cast iron  HT250
Gear material 20CrMnTi
Input Power 0.12-90KW
Output Torque 3.5-4000N.m
Output Speed 5-371 RPM
Gear Accuracy 7 to 6 level
Gear Surface hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Noise(Max) 60-70dB
Tem.rise(Max) 40°C
Tem.rise(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency Single stage 98%, Double-stage:96%, Three-stage:94%
Mounting Position Foot / Flange Mounting
Motor IP55,F Class

###

Input power rating and permissible torque
Size 37 47 57 67 77 87 97
Structure S           SA             SF             SAF             SAT              SAZ
Rated Power 0.12-1.5 0.12-1.5 0.18-3 0.25-5.5 0.55-7.5 0.75-15 1.5-22
Ratio 6.8-157.43 7.28-201 7.28-201 7.65-217.41 8.06-256.47 7.88-288 8.26-286.4
Torque(N.m) 90 170 300 520 1270 2280 4000

###

Gear Unit Weight
Gear Unit Type S37 S47 S57 S67 S77 S87 S97
Weight
 
7 10 14 26 50 100 170
The weight are mean values, only for reference
US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Marine, Toy, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: as Request
Step: Three-Step

###

Customization:

###

Housing material High-strength cast iron  HT250
Gear material 20CrMnTi
Input Power 0.12-90KW
Output Torque 3.5-4000N.m
Output Speed 5-371 RPM
Gear Accuracy 7 to 6 level
Gear Surface hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Noise(Max) 60-70dB
Tem.rise(Max) 40°C
Tem.rise(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency Single stage 98%, Double-stage:96%, Three-stage:94%
Mounting Position Foot / Flange Mounting
Motor IP55,F Class

###

Input power rating and permissible torque
Size 37 47 57 67 77 87 97
Structure S           SA             SF             SAF             SAT              SAZ
Rated Power 0.12-1.5 0.12-1.5 0.18-3 0.25-5.5 0.55-7.5 0.75-15 1.5-22
Ratio 6.8-157.43 7.28-201 7.28-201 7.65-217.41 8.06-256.47 7.88-288 8.26-286.4
Torque(N.m) 90 170 300 520 1270 2280 4000

###

Gear Unit Weight
Gear Unit Type S37 S47 S57 S67 S77 S87 S97
Weight
 
7 10 14 26 50 100 170
The weight are mean values, only for reference

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox     supplier China S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox     supplier
editor by czh 2023-01-16

Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts