solitary phase ac 220v enter vfd drives variable frequency inverter push motor 50hz to 60hz
Specs:
| Merchandise | S800V | |
| Management manner | Sensorless flux vector handle(SFVC) | |
| Voltage/Frequency(V/F) control | ||
| Optimum frequency | Vector management:-320Hz | |
| V/F handle:-3200Hz | ||
| Carrier frequency | 1-16kHz | |
| The provider frequency is automatically adjusted based mostly on the load functions. | ||
| Input frequency resolution | Digital setting:.01Hz | |
| Analog placing:maximum frequency x 0.571% | ||
| CZPTtup torque | G kind:.five Hz/one hundred fifty%(SFVC) | |
| P kind:.five Hz/one hundred% | ||
| Velocity range | 1:one hundred(SFVC) | |
| Velocity balance accuracy | ±0.five%(SFVC) | |
| Torque handle accuracy | ± five% (CLVC) | |
| Overload potential | G variety:60s for 150% of the rated present,3s for 180% of the rated recent. | |
| P type:60s for 120% of the rated present,3s for one hundred fifty% of the rated existing. | ||
| Torque increase | Set boost | |
| CZPTized improve .one%-30.% | ||
| V/F Curve | Straight-line V/F curve | |
| Multi-point V/F curve | ||
| N-power | ||
| V/F curve(one.two-electricity,one.4-power,one.6-electrical power,one.eight-power,square | ||
| V/F separation | Two varieties:complete separationhalf separation | |
| Ramp method | Straight-line ramp | |
| S-curve ramp | ||
| 4 groups of acceleration/deceleration time with the selection of .-6500.0s | ||
| DC braking | DC braking frequency:.00 Hz to maximum frequency | |
| Braking time:.-one hundred.0s | ||
| Braking motion current benefit:.%-one hundred% | ||
| tandard Purpose | JOG manage | JOG frequency selection:.00-fifty.00Hz |
| JOG acceleration/deceleration time:.-6500.s | ||
| Onboard a number of | It implements up to sixteen speeds through the simple PLC operate or mixture of X terminal states | |
| Onboard PID | It realizes method-controlled closed loop control systerm simply | |
| Automobile voltage regulation(AVR) | It can maintain continuous output voltage automatically when the major voltage modifications | |
| Overvoltage/Overcurrent stall management |
The present and voltage are limited automatically throughout the managing method so as to steer clear of regular tripping due to overvoltage/in excess of present |
|
| Torque limit and handle |
It can limit the torque immediately and prevent frquent in excess of existing tripping throughout the operating procedure |
|
| Instantaneous end isn’t going to quit |
The load feedback energy compensates the voltage reduction so that the AC generate can proceed to operate for a short time |
|
| Quick current restrict | It will help to steer clear of recurrent above current faults of the AC push | |
| Substantial performace |
Management of asynchronous motor is implemented throgh the high-efficiency existing vector |
|
| Handle engineering | ||
| Timing control | Time assortment:.-6500. minutes | |
| Conversation techniques | RS485 | |
| Managing command channel |
Given by the panel,handle terminals.Serial communication port,can be switched by several approaches |
|
| Frequency resource | ten kinds of frequency supply,given by Digital analog voltage,analog recent,Pulse,serial port.can be switched by man techniques. | |
| Auxiliary frequency resource | ten types of Frequency supply,can easily realize Micro ajustment,frequency Synthesizer. | |
| Input terminal |
6 digitak enter terinals,one of which supports up to100kHz substantial-velocity pulse input. |
|
|
2 analog input terminal,one of which only supports -10v voltage input and the other supports -10v voltage input or 4-twenty mA current enter |
||
| Enter and output | Output termianl | one digital output terminal |
| one relay output terminal | ||
|
one analog output termianl:that supports -20 mA present output or -10V voltage ouput |
||
Wirings:
Information:
