Wound Rotor Asynchronous Motor Compact Asynchronous DC Motor

Wound Rotor Asynchronous Motor Compact Asynchronous DC Motor

Product Description:
 
DC motor is a rotating motor that can change DC electric energy into mechanical power (DC motor) or mechanical vitality into DC electric powered energy (DC generator). It is a motor that can convert DC and mechanical strength into one an additional. When it operates as a motor, it is a direct current motor, which converts electrical power into mechanical power when it operates as a generator, it is a direct present generator, which converts mechanical strength into electrical vitality.
 

Merchandise Identify Wound rotor Asynchronous Motor Compact Asynchronous DC Motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The framework of DC motor need to consist of two elements: stator and rotor. The static part of DC motor is referred to as stator. The major operate of stator is to generate magnetic discipline, which is composed of base, major magnetic pole, commutation pole, end cap, bearing and brush device. Operating component is known as rotor, whose major purpose is to make electromagnetic torque and inductive electromotive force. It is the hub of energy conversion of DC motor. So it is also commonly referred to as armature, which is composed of rotor, armature core, armature winding, commutator and admirer.
Model Z Kind
Seat amount Z315-Z1000
power sixty~2800kW
Voltage 220~1000V
Torque range one.5 ~180kNm
Security degree IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Running speed  Constant Velocity /Lower Velocity /Change Pace /Substantial Speed Other 
Primary classification DC Motor is a equipment that converts mechanical vitality into DC electrical power. It is mainly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy source of alternator. Although in locations where DC electrical power is essential, AC electrical power rectifier is also used to convert AC into DC electricity, but from some elements of efficiency, AC rectifier power offer can not entirely change DC generator.  
Application DC motors are extensively utilised in tape recorders, video clip recorders, movie discs, electrical shavers, hair dryers, digital watches, toys and so on.
Routine maintenance strategy Specialist motor upkeep heart motor routine maintenance process: cleansing stator and rotor – replacing carbon brush or other areas – vacuum F strain dipping paint – drying – Calibration harmony.
1. Use environment ought to be constantly dry, motor area must be held clean, air consumption need to not be hindered by dust, fibers and other hurdles.
2. When the thermal protection of the motor proceeds to operate, it need to be ascertained whether or not the fault arrives from the motor or the overload or the setting value of the protecting gadget is also reduced. Right after removing the fault, it can be set into operation.
3, make certain that the motor is properly lubricated during procedure. The basic motor runs for about 5000 hrs, that is to say, lubricating grease must be extra or changed. When bearing overheating or lubricating deterioration is found in procedure, the hydraulic stress ought to adjust lubricating grease in time. When replacing grease, the old grease should be eliminated, and the oil groove of bearing and bearing protect need to be washed with gasoline. Then ZL-3 lithium grease ought to be loaded with 1/two (2 poles) and 2/three (4 poles, six poles and eight poles) of the cavity among the internal and outer rings of the bearing.
4. When the life of the bearing is over, the vibration and noise of the motor will enhance obviously. When the radial clearance of the bearing reaches the pursuing value, the bearing must be replaced.
5, when getting rid of the motor, it is Okay to take away the rotor from the shaft extension or the non extension end. If it is not required to unload the supporter, it is much more handy to get out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from becoming destroyed.
6. When replacing the windings, the kind, dimensions, turns and gauges of the original windings should be recorded. When these info are misplaced, they need to be obtained from the maker and the first designed windings should be transformed at will, which frequently deteriorates a single or a number of efficiency of the motor or even makes it not possible to use them.

 

 

Wound Rotor Asynchronous Motor Compact Asynchronous DC Motor

Tags:

Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts