Ye2 Series High Efficiency Three Phase Asynchronous Motor

Ye2 Series High Efficiency Three Phase Asynchronous Motor

Solution Description:
 
DC motor is a rotating motor that can convert DC electric powered strength into mechanical vitality (DC motor) or mechanical strength into DC electric strength (DC generator). It is a motor that can change DC and mechanical power into one one more. When it operates as a motor, it is a direct current motor, which converts electrical energy into mechanical vitality when it operates as a generator, it is a immediate present generator, which converts mechanical strength into electrical power.
 

Solution Name Ye2 sequence Substantial Effectiveness Three Section Asynchronous Motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition framework The construction of DC motor should consist of two components: stator and rotor. The static element of DC motor is named stator. The main function of stator is to produce magnetic area, which is composed of foundation, major magnetic pole, commutation pole, conclude cap, bearing and brush gadget. Working element is known as rotor, whose principal function is to produce electromagnetic torque and inductive electromotive drive. It is the hub of energy conversion of DC motor. So it is also generally named armature, which consists of rotor, armature core, armature winding, commutator and enthusiast.
Product Z Type
Seat variety Z315-Z1000
electricity 60~2800kW
Voltage 220~1000V
Torque selection one.five ~180kNm
Safety level IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Functioning velocity  Constant Speed /Lower Pace /Adjust Pace /High Speed Other 
Principal classification DC Motor is a machine that converts mechanical strength into DC power. It is largely utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy supply of alternator. Though in spots where DC electricity is needed, AC energy rectifier is also utilized to change AC into DC electricity, but from some elements of performance, AC rectifier power provide can not fully change DC generator.  
Application DC motors are widely used in tape recorders, video recorders, video discs, electrical shavers, hair dryers, digital watches, toys and so on.
Servicing strategy Professional motor upkeep centre motor routine maintenance approach: cleaning stator and rotor – replacing carbon brush or other components – vacuum F strain dipping paint – drying – Calibration harmony.
1. Use setting must be constantly dry, motor floor need to be held clear, air intake must not be hindered by dust, fibers and other obstacles.
two. When the thermal safety of the motor continues to work, it need to be ascertained whether the fault arrives from the motor or the overload or the setting value of the protective system is also lower. Soon after removing the fault, it can be place into operation.
3, ensure that the motor is properly lubricated in the course of procedure. The common motor runs for about 5000 hrs, that is to say, lubricating grease must be additional or changed. When bearing overheating or lubricating deterioration is discovered in procedure, the hydraulic pressure ought to modify lubricating grease in time. When replacing grease, the previous grease must be taken out, and the oil groove of bearing and bearing go over need to be washed with gasoline. Then ZL-three lithium grease should be filled with one/two (two poles) and two/three (4 poles, six poles and 8 poles) of the cavity amongst the interior and outer rings of the bearing.
four. When the lifestyle of the bearing is over, the vibration and sounds of the motor will increase obviously. When the radial clearance of the bearing reaches the pursuing benefit, the bearing ought to be replaced.
5, when getting rid of the motor, it is Okay to take away the rotor from the shaft extension or the non extension stop. If it is not essential to unload the admirer, it is much more hassle-free to take out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from getting broken.
6. When replacing the windings, the form, measurement, turns and gauges of the authentic windings should be recorded. When these knowledge are dropped, they must be acquired from the producer and the authentic created windings ought to be altered at will, which frequently deteriorates 1 or a number of performance of the motor or even tends to make it extremely hard to use them.

 

 

Ye2 Series High Efficiency Three Phase Asynchronous Motor

Tags:

Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts