Z4-355-11 18kw\45kw\90kw\200kw\800kw Z4 Series DC Motor

Z4-355-11 18kw45kw90kw200kw800kw Z4 Series DC Motor

Merchandise Description:
DC motor is a rotating motor that can transform DC electrical vitality into mechanical strength (DC motor) or mechanical energy into DC electric energy (DC generator). It is a motor that can transform DC and mechanical power into 1 an additional. When it runs as a motor, it is a immediate current motor, which converts electrical vitality into mechanical power when it operates as a generator, it is a immediate present generator, which converts mechanical vitality into electrical power.

Merchandise Identify  Z4-355-eleven 18kw45kw90kw200kw800kw Z4 sequence DC motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition structure The composition of DC motor should consist of two areas: stator and rotor. The static portion of DC motor is known as stator. The principal function of stator is to make magnetic subject, which is composed of base, main magnetic pole, commutation pole, end cap, bearing and brush system. Running part is known as rotor, whose major perform is to generate electromagnetic torque and inductive electromotive drive. It is the hub of power conversion of DC motor. So it is also generally called armature, which is composed of rotor, armature main, armature winding, commutator and enthusiast.
Design Z Variety
Seat variety Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque variety one.5 ~180kNm
Defense level IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Operating velocity  Constant Speed /Low Velocity /Adjust Speed /Higher Speed Other 
Main classification DC Motor is a device that converts mechanical energy into DC energy. It is primarily utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power source of alternator. Despite the fact that in areas in which DC electrical power is needed, AC energy rectifier is also utilized to change AC into DC electrical power, but from some facets of performance, AC rectifier energy provide can not fully exchange DC generator.  
Software DC motors are extensively utilised in tape recorders, movie recorders, movie discs, electric shavers, hair dryers, digital watches, toys and so on.
Upkeep method Expert motor upkeep heart motor maintenance approach: cleaning stator and rotor – changing carbon brush or other components – vacuum F strain dipping paint – drying – Calibration stability.
one. Use surroundings must be constantly dry, motor surface must be kept thoroughly clean, air intake ought to not be hindered by dust, fibers and other hurdles.
2. When the thermal protection of the motor continues to operate, it need to be ascertained no matter whether the fault will come from the motor or the overload or the placing worth of the protective gadget is way too low. Following removing the fault, it can be place into procedure.
three, ensure that the motor is effectively lubricated throughout operation. The general motor runs for about 5000 several hours, that is to say, lubricating grease should be added or replaced. When bearing overheating or lubricating deterioration is identified in operation, the hydraulic strain need to modify lubricating grease in time. When changing grease, the outdated grease need to be eliminated, and the oil groove of bearing and bearing go over should be washed with gasoline. Then ZL-3 lithium grease ought to be filled with 1/two (2 poles) and two/three (4 poles, 6 poles and 8 poles) of the cavity amongst the inner and outer rings of the bearing.
four. When the daily life of the bearing is in excess of, the vibration and sound of the motor will increase clearly. When the radial clearance of the bearing reaches the pursuing benefit, the bearing must be changed.
five, when getting rid of the motor, it is Ok to get rid of the rotor from the shaft extension or the non extension finish. If it is not necessary to unload the admirer, it is much more handy to just take out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from currently being damaged.
6. When changing the windings, the sort, size, turns and gauges of the first windings must be recorded. When these data are missing, they should be obtained from the maker and the authentic developed windings need to be transformed at will, which typically deteriorates one particular or numerous performance of the motor or even helps make it not possible to use them.



Z4-355-11 18kw45kw90kw200kw800kw Z4 Series DC Motor


Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts