Z4 Series 60kw Medium DC Motor

Z4 Series 60kw Medium DC Motor

Item Description:
DC motor is a rotating motor that can transform DC electric strength into mechanical vitality (DC motor) or mechanical energy into DC electrical strength (DC generator). It is a motor that can transform DC and mechanical vitality into one one more. When it runs as a motor, it is a direct existing motor, which converts electrical power into mechanical power when it runs as a generator, it is a immediate present generator, which converts mechanical power into electrical strength.

Solution Name Z4 Series 60kw Medium DC Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The framework of DC motor must consist of two elements: stator and rotor. The static part of DC motor is referred to as stator. The primary purpose of stator is to produce magnetic subject, which is composed of base, principal magnetic pole, commutation pole, end cap, bearing and brush device. Operating component is named rotor, whose primary operate is to generate electromagnetic torque and inductive electromotive power. It is the hub of vitality conversion of DC motor. So it is also typically referred to as armature, which is made up of rotor, armature core, armature winding, commutator and supporter.
Model Z Variety
Seat number Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque assortment one.five ~180kNm
Safety stage IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Working speed  Constant Speed /Minimal Velocity /Modify Pace /High Speed Other 
Primary classification DC Motor is a device that converts mechanical energy into DC electrical power. It is mainly employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy source of alternator. Even though in areas the place DC power is required, AC electrical power rectifier is also employed to transform AC into DC electricity, but from some aspects of performance, AC rectifier power provide can not entirely substitute DC generator.  
Software DC motors are commonly utilized in tape recorders, video clip recorders, online video discs, electric powered shavers, hair dryers, electronic watches, toys and so on.
Maintenance method Professional motor maintenance centre motor routine maintenance approach: cleansing stator and rotor – changing carbon brush or other elements – vacuum F stress dipping paint – drying – Calibration harmony.
1. Use atmosphere must be often dry, motor area ought to be held clean, air intake must not be hindered by dust, fibers and other obstacles.
two. When the thermal safety of the motor continues to function, it must be ascertained no matter whether the fault will come from the motor or the overload or the environment value of the protective system is also lower. Following reducing the fault, it can be set into procedure.
3, make sure that the motor is effectively lubricated in the course of operation. The common motor runs for about 5000 hrs, that is to say, lubricating grease must be added or changed. When bearing overheating or lubricating deterioration is located in operation, the hydraulic strain ought to alter lubricating grease in time. When replacing grease, the aged grease ought to be taken out, and the oil groove of bearing and bearing protect need to be washed with gasoline. Then ZL-3 lithium grease should be loaded with 1/two (two poles) and two/3 (4 poles, 6 poles and eight poles) of the cavity between the internal and outer rings of the bearing.
4. When the daily life of the bearing is more than, the vibration and sounds of the motor will boost certainly. When the radial clearance of the bearing reaches the following price, the bearing must be changed.
5, when taking away the motor, it is Okay to get rid of the rotor from the shaft extension or the non extension conclude. If it is not required to unload the supporter, it is much more convenient to get out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from being ruined.
6. When changing the windings, the sort, dimensions, turns and gauges of the first windings need to be recorded. When these information are misplaced, they ought to be attained from the producer and the unique developed windings ought to be modified at will, which frequently deteriorates a single or numerous overall performance of the motor or even tends to make it not possible to use them.



Z4 Series 60kw Medium DC Motor


Geared Motor

As one of the leading geared motor manufacturers, suppliers, and exporters of mechanical products, We offer geared motor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the geared motor.

Recent Posts